Manufacturing plywood for 25+ years
Plywood Nepal builds its homes on.
MR, BWR and BWP grade plywood, block boards, teak ply and flush doors — dried, pressed and tested in our own factory before they reach your site.
Product range
One brand for every room and every site.
Duro MR Grade Ply
Moisture-resistant plywood for wardrobes, beds, partitions and everyday indoor furniture.
View details →
Duro BWR Grade Ply
Boiling-water-resistant plywood for kitchen cabinets and spaces that see regular moisture.
View details →
Duro PF Ply (BWP Grade)
Phenol-formaldehyde bonded, boiling-water-proof ply for wet areas, vehicles and outdoor use.
View details →
Duro Teak Ply & Veneers
Teak-faced plywood and veneers with rich grain for premium furniture, doors and panelling.
View details →
Duro Block Board
Light, stable and warp-free board that holds screws firmly — the carpenter’s choice for cupboards.
View details →
Duro Flush Doors
Strong, stable doors in 70+ designs, made from cross-banded plywood bonded with PF resin.
View details →
Duro Shuttering Plywood
Phenol-bonded formwork ply that survives repeated pours and gives concrete a cleaner finish.
View details →Buying guide
Which ply goes where?
A quick guide for homeowners, carpenters and architects. Our dealers will help you choose for your exact job.
| Where you will use it | Recommended | Why |
|---|---|---|
| Kitchen cabinets | BWR / BWP | Steam, spills and daily cleaning |
| Sink unit, bathroom vanity | PF / BWP | Direct and repeated water contact |
| Wardrobes, beds, bedroom | MR Grade | Dry indoor use, best value |
| Office furniture | MR / Block Board | Flat, stable and easy to work |
| Long shelves, cupboards | Block Board | Light, does not sag, holds screws |
| Doors and panelling | Flush Doors, Teak Ply | Finished look with strength |
| Concrete work on site | Shuttering Ply | Reusable across many pours |
How we make it
From log to finished panel, under one roof.
Every sheet goes through the same controlled process in our own factory — so the ply you buy in Butwal is the same ply you buy in Kathmandu.
- 01Timber selectionLogs checked for species, age and defects.
- 02PeelingEven veneers peeled to a set thickness.
- 03Dryer dryingVeneers dried to a controlled moisture level.
- 04Gluing & pressingResin applied, then hot-pressed under high pressure.
- 05CalibrationSanded and calibrated to an even thickness.
- 06TestingEvery batch checked before it leaves the factory.
Doors
70+ door designs, ready to install.
PF-bonded, cross-banded flush doors that stay straight and resist water, termites and borers.
Authorised dealers
Buy Duro Ply near you.
Tell us what you are building.
Send us your requirement and we will connect you with the nearest dealer.